Emerit Console alternative for system integrators
Cuebly is the white-label personal safety platform for system integrators and security companies. Configure your Emerit devices over the air in Cuebly, next to TWIG, Teltonika, Eview, Queclink and the Cuebly app, and run a complete safety service for all your customers in your own brand: smart alarm scenarios, alarm receiving centre integrations, rich reporting and beacons at no extra cost.
Best for: integrators and security companies that deliver Emerit devices and want one platform for configuration, alarms and customers.
Configure Emerit devices in Cuebly
Emerit makes great lone worker devices, from the e-WG200 watch to the e-RG360 phone. Cuebly was the first vendor-independent platform with complete over-the-air configuration for Emerit, built in close collaboration with Emerit. Everything you set in Emerit Console, you now set in Cuebly, next to all your other devices:
- Man down: sensitivity, pre-alarm timing and detection modes (tilt, no motion, fall)
- Alarm numbers: who is called, in which order, with which escalation timing
- Connectivity: SIM and Wi-Fi, with Wi-Fi credentials pushed remotely
- Location: GPS intervals, Bluetooth beacons and Wi-Fi location for indoors
- Audio: one-way or two-way, discreet or audible
- Battery and interface: power modes, battery alerts, buttons and vibration patterns
Changes reach the device over the air within seconds, for one device or a whole fleet. No USB cable, no site visit.
Emerit Console and Cuebly compared
| Emerit Console and Emerit Services | Cuebly | |
|---|---|---|
| Built for | Configuring Emerit devices | Running a safety service for many customers |
| Supported devices | Emerit only | Emerit, TWIG, Teltonika, Eview, Queclink and more, plus the Cuebly app |
| Over-the-air configuration | Yes, free | Yes, for every supported brand in one interface |
| Alarm handling | Calls and SMS from the device; ARC over SIA DC-09 | Scenarios with SMS, email, voice messages, app alerts, assistance requests, tracking, webhooks and ARC forwarding |
| Alarm receiving centre protocols | SIA DC-09 | SIA DC-09, REST, SOAP, MPTP, XML, custom protocols and more |
| Scenario automation | Not advertised | Any trigger to one or more actions, on a schedule if needed |
| Alarm monitoring dashboard | Not advertised | Live alarms, maps and responses per customer |
| Smartphone safety app | Emerit app on supported phones | Cuebly app for any iOS and Android phone: SOS, man down, lone worker timer, geofencing, indoor location |
| White-label apps and portals | Not advertised | Portal, app and onboarding in your brand |
| Customers and access | Not advertised | Separate environment per customer, roles and rights per user |
| Indoor location | e-BBE9 beacons for Emerit devices | Beacons at no extra cost, for the app and supported devices |
| SIM cards and connectivity | Any SIM card | SIM cards managed from the platform |
| Reporting | Not advertised | Account and billing reports, device activity reports, live logging per device, attendance reports and more |
“Not advertised” means we found no mention in Emerit’s own product information (September 2026).
Configuration is just the start
Emerit Console and Emerit Services are free tools to configure Emerit devices, and they do that well. But that is where they stop: no alarm scenarios, no integrations beyond the device’s own alarm output, little to no reporting. A professional lone worker service needs everything that comes after:
- Alarms that reach the right people, every time. Scenarios decide who is alerted: the team, the nearest colleague, the site manager or a 24/7 alarm receiving centre. Change them in minutes, per customer.
- Colleagues who can respond. Assistance requests let colleagues accept or decline, so everyone sees who is on the way.
- Reports that run your business. Account and billing reports to invoice your customers, device activity reports, live logging per device, attendance reports and more.
- Your brand, everywhere. Customers see your portal, your app and your onboarding. The relationship stays yours.
One platform for every device and every customer
Your customers do not all need the same device. One wants an Emerit watch, another a rugged tracker, a third starts with the app. With Cuebly they all run side by side, with the same scenarios and the same dashboard. Your team learns one system, and you can say yes to every request.
Connect to any alarm receiving centre
Emerit devices send alarms over SIA DC-09. Cuebly takes those alarms, adds scenarios, customer data and location, and forwards them to alarm receiving centres over SIA DC-09, REST, SOAP, MPTP, XML and many custom protocols. Already working with an ARC? There is a good chance Cuebly already speaks its language.
Switch in four steps
- Connect your Emerit devices. No new hardware needed.
- Set your configuration. Man down, alarm numbers and connectivity in Cuebly, for one device or a whole fleet.
- Build the scenarios. Decide who gets which alarm, and connect your alarm receiving centre.
- Go live in your brand. Invite users with onboarding links in your brand.
With Cuebly you can be up and running within a week.
Cuebly enables us to deliver highly tailored solutions for complex customer requirements. Their platform lets us turn simple incoming alarm data into precise, custom outputs, fully controlling structure, triggers, and scenarios. With fast, engaged support and an openness to feedback, Cuebly stands out as a reliable and flexible partner.
Linus P. Hellsten
Head of Technical Support (LWP) – Almas Industries DE
Frequently asked questions
Cuebly. It configures Emerit devices over the air and supports every other major lone worker brand in one white-label platform, with scenarios, alarm receiving centre integrations, a safety app and reporting built for service providers.
Yes. Man down, alarm numbers, connectivity, location, audio, battery and interface settings, over the air, for one device or a whole fleet.
Emerit watches such as the e-WG200, phones such as the e-RG360, and the e-B10 Bluetooth button, which pairs with the Cuebly app so the phone and the button watch each other.
No. Indoor location with beacons is included, however many beacons you place.
Yes. Cuebly connects over SIA DC-09, REST, SOAP, MPTP, XML and many custom protocols.
With Cuebly you can be up and running within a week.