Hardware and integrations
Every device, gateway and alarm centre in one platform
Cuebly works with the safety devices, beacons and gateways your customers already use, and sends alarms to the alarm receiving centre of your choice. This page lists what is supported today.
- TWIG
- Emerit
- SCAIP
- Ajax Hub
- SIA DC-09
5+
Device brands, plus any SCAIP device
30+
Connected alarm receiving centres
23
Countries with a connected ARC
Devices
Supported devices per brand
Each device is added, configured over the air and followed in the same way. And next to them, the Cuebly app on iOS and Android.
Every TWIG device
TWIG
Alarm buttons, man down, location indoors and outdoors, and direct messages on the device.
Every Emerit device
Emerit
Wearables, rugged phones and the e-B10 button, with indoor location. The Emerit Connect app works too.
I/O gateways
Teltonika
I/O gateways that bring alarms from machines, installations and vehicles into a scenario.
Personal alarms
Eview
Small personal alarms with an SOS button and location.
Personal tracker
Queclink
A personal tracker with an SOS button and location.
Any brand
Any device using SCAIP
SCAIP, the Social Care Alarm Internet Protocol, is widely used for care and healthcare alarms. Devices that speak it connect without a custom integration.
Indoor positions
Beacons and Wi-Fi
Mix them per site. Beacons are included in the device price.
Emerit
e-BBE9
BLE beacons for Emerit devices and the Cuebly app, with a battery life of 24 months or more.
TWIG
TWIG SRD
Compact RF beacons for industrial and logistics sites, strong in buildings full of metal.
Any brand
iBeacon, Eddystone and Wi-Fi
BLE beacons from BlueUp, Teltonika, Zebra and others, or the Wi-Fi access points already on site.
Gateways
Building alarms, machines and other systems
Gateways bring alarms from outside into a scenario, so they reach the app, devices and the control room.
Security
Ajax Hub
Panic buttons and call points of an Ajax system, with which button was pressed.
Fire safety
Fire alarm panels
Building alarms from a fire alarm panel, through an Elexol ESPA 4.4.4 gateway.
Machines
Teltonika FMC650
Potential-free contacts and relays of machines, such as a stop or a temperature alarm.
Any system
Webhooks
SCADA, building management, access control or your own software can start a scenario.
Alarm receiving centres
Connected to more than 30 alarm centres
Alarms from any device or the app go straight to the centre that monitors them. Or take them yourself in the alarm environment built into Cuebly.
Alarm receiving centres
23 countries
Hover over a country, or tap it, to see who is connected.
All connected alarm receiving centres per country
- Austria: Securitas
- Belgium: Securitas
- Croatia: Securitas
- Czech Republic: Securitas
- Denmark: Den Jyske Kontrolcentral, Securitas
- Finland: Securitas
- France: Securitas
- Germany: Securitas, SOS Service
- Hungary: Securitas
- Ireland: Securitas
- Luxembourg: Securitas
- The Netherlands: Devision Meldkamer, Europac, Huschka, Securitas, Siemens Alarmcentrale, VHD
- Norway: Securitas
- Poland: Securitas
- Portugal: Securitas
- Romania: Securitas
- Serbia: Securitas
- Slovakia: Securitas
- Spain: Securitas
- Sweden: Lövestad Larmcentral, SBFF, Securitas, Securitas Technology
- Switzerland: Securitas
- Türkiye: Securitas
- United Kingdom: Securitas
Protocols: SIA DC-09, SCAIP, REST, SOAP, MPTP, XML and many custom protocols.
API and custom integrations
Build what is not on the list
Webhooks and a REST API connect Cuebly to almost any system.
Start a scenario from your own software, push alarms into a ticketing system, or read device status into your dashboards. For a new device brand we can build the integration with you.
- Webhooks as a scenario trigger
- REST API
- Custom integrations on request
Explore
More about the platform
Add, configure and follow every device, whatever the brand.
Floor plans, beacons and geofences for indoor positions.
Ajax buttons, wearables and the app in one service.
Questions
Frequently asked questions
Every TWIG and Emerit device, Teltonika FMC640 and FMC650 I/O gateways, the Queclink GL320MG tracker, the Eview EV-04, EV-06 and EV-12, any device using SCAIP, and the Cuebly app for iOS and Android. Beacons from Emerit, TWIG and any iBeacon or Eddystone brand work for indoor positions.
No. Cuebly configures devices over the air and shows the firmware version of every device. Firmware updates stay with the manufacturer’s own tools.
More than 30 alarm receiving centres in 23 European countries. You can also take alarms yourself in the alarm environment built into Cuebly.
SIA DC-09, SCAIP, REST, SOAP, MPTP and XML, plus many custom protocols. Ask us if your alarm centre uses another one.
Through a gateway. The Ajax Hub passes on which button was pressed, and fire alarm panels connect through an ESPA 4.4.4 gateway. The scenario then sends the alarm to the app, to devices and to the control room.
Often, yes. Any system that can call a webhook can start a scenario, and the API covers the rest. For a new device brand, ask us about a custom integration.
Step by step guides for every device and integration are in the Cuebly Wiki.
Demo
See your devices in the platform
In the demo we add a device, link a gateway and send an alarm to an alarm centre.